Model: KN-UV03 / KN-UV05 / KN-UV10
Category:UV Laser Marking Machine
Brand: Kano Laser CNC
Color: Blue and white
Price range: $ 5000- $ 10000
Rating: 4.8
Views: 11245
Supply Ability: 50 sets / month in stock
Related Suggestion
Online Consultation
Product introduction
The desktop UV laser marking machine adopts ultraviolet (UV) laser, which is a kind of cold light. UV laser marking machines are mainly used for plastics, including PP (polypropylene), PC (polycarbonate), PE (polyethylene), ABS, PA, PMMA, silicon, glass, and ceramics.
Details of machine components
Laser source: Huaray from China
- The degree of protection of the outer cavity is IP65, the inner and outer cavities are double sealed and
both are protected by inert gas
- LBO crystal electric switch technology, the life of the light source increases 4 times
- With the third generation air filter unit, the humidity control is less than 0.2%
- New design, 50% weight reduction and 30% volume reduction
Galvo head: Sino
The galvanometer has good operating stability, high positioning accuracy, fast marking speed, and strong anti-interference ability. The standard mechanical scan angle is ± 11 ° and the maximum mechanical scan angle is ± 15 °.
F-theta lens: Singapore Wavelength
The lens is commonly used in galvanometer scanning systems for laser marking, engraving and cutting; with the ability to deliver a focused point to many points within a scan field.
Water cooler
- The cooling capacity reaches 800w, using environmentally friendly refrigerant
- Small size, long lifetime, simple operation
- The precision of temperature control can reach ± 3 ℃
- With alarm protection function
- The smart thermostat has two modes of temperature control
Control board: BJJCZ Beijing from China
Original Beijing JCZ control system, EZCAD software (support windows 7/8/10), Support Photoshop, Coral drawing and AI, PLT, DXF, BMP, DST, DWG, DXP form etc.
Computer: Lenovo
The CPU and graphics card operate on standard power consumption, programmed automatically and balance the operating noise and the performance of the whole machine.
Lifting pillar: 500mm or 800mm
Manual height adjustment 500mm standard, it is convenient to find the focus, if you use 300 * 300mm lens, change focus distance, must use 800mm lifting pillar.
Red light indicator system
Internal and external double red focus system
Help you easily find the focus length
Safety glasses
Protect eyes of laser machine operators, avoid radiation.
Fixed lines
Attach two fixed lines, when recording the same area in the same matter, with this you fix the position, to save more time.
Pedal
Free your hands, improve marking efficiency, step on the pedal and dial once.
Electronic component
Adopt genuine electronic components to connect the circuit, everything is ordered and sequenced, it is convenient to find the corresponding circuit for detection when problems are found.
Accessories that can be used with the machine
Rotary device: diameter 80mm
* Jewelry: such as rings, bracelets
* Cylinder: such as cups, coke bottles, steel tube, battery
* Hollow circle: bearing, wire
Fixture
Generally used for machines over 50W, it is mainly needed for cutting metal. When cutting thin metal plates, the plates cannot be placed directly on the worktable, because the fiber laser works with thermal effects and continues to mark a part of the plate for a long time. Score until the board is cut, prolonged heating in one place will cause the board to warp. At this time, this device is necessary to clamp the plate to insulate and not deform.
Smoke extractor
When the marking machine works for deep marking or metal cutting, it will produce more smoke than general marking. At this time, to protect the air in the store, it is very appropriate to set up a smoke extractor. If the marking machine is used in the factory, the smoke may be emitted by itself.
Machine Applications
Applicable industries:
1. Electronic components, battery chargers, power cord, computer accessories, mobile phone accessories (mobile phone screen, LCD screen) and communication products.
2. Auto and motorcycle spare parts, auto glass, instrument gadgets, optical devices, aerospace, military industry products, hardware machinery, tools, measuring tools, cutting tools, sanitary ware.
3. Pharmaceutical, food, beverage and cosmetic industry.
4. Plastic, glass, crystal products, arts and crafts of surface and internal thin film etching, cutting or engraving of ceramics, watches and clocks.
5. Polymeric material, most metallic and non-metallic materials for surface processing and coating film processing, prior to light polymeric materials, plastic, fire prevention materials, etc.
Applicable materials:
PP (polypropylene), PC (polycarbonate), PE (polyethylene), ABS, PA, PMMA, silicon, glass and ceramic.
Types of plastic that can be engraved with silicone with UV laser marking system.
Polyamide (PA).
Polyimid (PI).
Polyester (PES).
Polystyrene (PS).
Polyethylene (PE).
Polypropylene (PP).
Polycarbonate (PC).
Polyoxymethylene (POM).
Polyether ketone (PEEK).
Polyarylsulfone (PSU, PPSU).
Polymethylmethacrylate (PMMA).
Polyethylene terephthalate (PET).
Acrylonitrile Butadiene Styrene Copolymer (ABS).
Warranty and After-Sales Service
1. Full 24 hours after-sale service: Our expert engineer will help customer to solve the problem by Whatsapp, Skype, Teamviewer or Online Chat in time when problems arise.
2.All the finished machines we deliver are 100% strictly tested by our quality control department and engineering department.
3.Custom OEM service and OEM orders are welcomed due to our abundant experiences. All OEM services are free, customer only need to provide us with their logo drawing, function requirements, colors, etc. MOQ is not required. None of your personally identifiable information (such as your name, address, email address, banking information, etc.) will be disclosed or shared with third parties.
Technical parameters
Model
KN-UV03 / KN-UV05 / KN-UV10
Laser power
3W/5W/10W
Laser wavelength
355nm
Machine power
800w
Working area
100*100mm
Repetition frequency range
8-15kHz
Typical beam quality, M2
<1.1
Minimum line width
0.01mm
Minimal character
0.1mm
Repeatability accuracy
±0.001mm
Working voltage
220V ± 10% / 50Hz
Cooling way
Water cooler
Working environment
Clean and dust-free or less dust
Continuous working time
>16h
Humidity
45 ~ 85% (non-condensing)
Operating temperature
0 ~ 40℃
Marking format
Graphics, text, barcodes, QR code, auto date, batch number, serial number, etc.
Support graphic format
Ai, plt, ;dxf, dst, svg, nc, bmp, jpg, jpeg, gif, tga, png, tiff, tif
Packing size (L * W * H)
89*87*154cm
Net / gross weight
100kg/135kg
Product features and benefits
1. The UV laser marking machine adopts 355nm pumped UV laser device, to obtain a smaller diameter of focus point and fine marking effect.
2. Metal absorbs UV higher than infrared, and thus more suitable for UV laser marking on metal and glass materials compared to infrared pump machine.
3. The narrower pulse width of the UV laser reduces the processing time of the materials, so the materials avoid warping or burning due to temperature.
4. With smaller heat-affected area and more beautiful marking effect, our product UV laser marking system can satisfy customer with higher marking requirements.
5. The UV laser machine is equipped with a professional water-cooling machine, air-cooled water circulation cooling, with high efficiency water-cooled and small size air-cooled.
6. Low energy consumption, environmentally friendly, without consumables. Little affect the area, no heat effect, no problem of burned material.
Frequently asked questions
1.How to install and run the laser engraving machine?
Our engineer has installed the machine before shipment, for the installation of some small parts, we will send the user manual together with the machine. 99% of clients can teach themselves.
2.How can I get the sample to check its quality?
If you want to mark a sample for quality check, we can help you do it. You need to provide the logo or design to us first, free trademark samples can be provided.
3.Are there wearing parts for the laser marking machine and how much do I need to buy?
The laser marking machine has no consumable parts. The main configuration of the machine is the laser, the galvanometer and the F-theta lens. If the dust is cleaned in time after using the machine, these parts will not be damaged. Our guarantee is for the whole machine. Once something is broken, please contact us as soon as possible and we will give you a reasonable solution, such as send you a new one.
4.What's the package of the laser engraving machine?
We have a 3-layer package: for the outside, we adopt a wooden case; in the middle, the machine is covered by foam, to protect it against shocks; For the inner layer, the machine is covered by a thickened plastic bag for waterproofing
5.Can UV laser marking machine engrave color?
It will be another MOPA laser marking machine, which is professional stainless steel color marking machine. The main difference is the laser and some technical parameters. You can search the blog for more details.
6.Does the UV laser marking machine use household electricity or industrial electricity?
Laser marking machine uses household electricity, 220V 50Hz or 60Hz.
PRODUCTS
CONTACT US
Shandong Kano Machinery Co.,Ltd
Room 4-3-902, No. 7000, Jingshi Street, Jinan City, Shandong Province, China